Andrew MT050C DryLine Dehydrator, 19 in

DryLine® Dehydrator, Low-pressure membrane, 19 in rack mountable, Wall mountable, 3.0 psig (2-6 adjustable), with summary and discrete alarms, 115/230 Vac, 50/60 Hz.

Specifications:
Alarm Type: Discrete | Summary
Circuit Breaker Requirement: Electrical connections require separate circuits for dehydrator installation
Dehydrator Type: Automatic Membrane
Dew Point: Better than -45 °C (-50 °F) at 95% RH at +40 °C (+104 °F)
Excess-Run Alarm: 10 minutes, factory set
Flow Rate, nominal: 3.4 SLPM
High-Humidity Alarm: 7.5% RH, factory set
Low-Pressure Alarm: 68 mbar | 7 kPa | 1 psig
Mounting: Bench | Floor | Rack | Wall
Port Count: 4
Port Type: 3/8 in PE tube
Power Cord: Europe power cord with stripped leads | USA power cord
Power-Fail Alarm: Loss of input power
Rack Type: EIA 19 in | ETSI N3 (optional)
Rack Units: 4
Regulated Output Pressure Type: factory set
Regulated Output Pressure, maximum: 41.4 kPa | 6.005 psig
Regulated Output Pressure, minimum: 14 kPa | 2.031 psig

Dimensions:
Product Height: 172.7 mm | 6.799 in
Product Width: 439.4 mm | 17.299 in
Product Depth: 419.1 mm | 16.5 in
Volume Capacity, maximum: 1.699 m³ | 60 ft³
Volume Capacity, minimum: 0 m³ | 0 ft³

Electrical Specifications:
Alarm Contact Rating: Form C dry contacts, 2 amps at 30 Vdc
Power Consumption, at runtime: 220 W
Power Consumption, average: 6.6 W
Power Consumption, maximum: 220 W
Power Consumption, minimum: 0.2 W
Power Frequency: 60/50 Hz
Power Phase: Single
Suggested Circuit Breaker Size: 15 A
Voltage: 115/230 Vac ±10%, selectable
Voltage Type: ac

Operating Temperature: -10 °C to +50 °C (+14 °F to +122 °F)