The Exstreamer 110 IP Audio Decoder decodes and plays multi-protocol and multi format audio streams, including MP3, AACplusV2, WMA, PCM, G.711, Ethersound. It features a stereo line-level output, headphone connection, low power consumption and a relay output that can be used to activate amplifiers. An LCD display can show title information and aid with device setup. The built-in IR receiver and included IR remote control allows channel selection and volume control.
Audio over IP decoder with line-level audio outputs, USB flash interface, IR receiver, LCD display and relay, low power, multi-format (MP3/WMA/AACplusV2,PCM,Ethersound) support.
Applications:
– Multiroom IP Audio System Receiver
– Internet Radio Receiver
– Instore Audio Player
– SIP and IP Paging Zone Device
– Digital Annunciator, Message Player, Message Repeater
– Generic VoIP decoder for IP Paging and Announcement applications
– Commercial Audio Streaming Applications
Features:
– IP Streaming via TCP, UDP, RTP, Multicast
– Line Level Output (Stereo)
– Relay Output (Ex110 & Ex120 only)
– RS-232 Serial Port
– Power Supply (9-30V, plug included)
– IR receiver and Display built-in (Ex110 & Ex120 only)
– MicroSD or USB Flash Interface
– AACplus, MP3, Ogg Vorbis, G.711, PCM linear Decoding
Specifications:
Electrical –
9 to 30 VDC, 5 Watt max.
2.1mm barrel connector
Ethernet –
10/100Mbps auto,
RJ-45 connector with integrated Link/Activity LED
Protocols: TCP/IP, UDP, RTP, SIP, DHCP,
Multicast capable – ES-100/spkr (Ethersound, output, no daisy-chain) support
Analog Output –
Line level output, 40..60 Ohm output impedance on RCA and 1/8″ headphone jack. Output level software controllable
Full scale output voltage: 5.6 dBu, 4 Vpp
Frequency response (-3dB) 19Hz ..22kHz *
Dynamic range 87 dB
SNR/THD -87 dB, <0.05%
Audio formats –
MP3 CBR/VBR, up to 320kbps, 8..48kHz sample freq.
AAC, AAC plus, AAC-HE (AAC plus V2)
WMA (up to version 9), Ogg Vorbis
PCM 16bit @8, 16, 22.05, 24, 32, 44.1, 48 kHz
G.711, uLaw, aLaw (sample rates same as PCM)
Discrete I/O – 1 NO relay contact, 24V 0.5A (110&120 models only)
RS-232 Interface – 300..230’400 Baud asynchronous, tunneling or local control
Display – Backlit LCD, 2×16 chars (110&120 models only)
IR Interface –
IR via serial port, built-in IR receiver (110&120 models only)
IR remote control included with Exstreamer 110 & 120
Mechanical – Aluminum case, 250g, rack and wall mountable using accessories
Dimensions (W x H x D) – 108x38x78.7mm (4.25×1.5×3.1 inch)
Model comparison –
Model 100 Memory USB, IR use kit
Model 105 Memory MicroSD, IR use kit
Model 110 Display 2×16, Memory USB, Relay
Model 120 Display 2×16, Memory MicroSD, Relay
MTBF –
Calculated acc. MIL217F at 25 degree C;
Exstreamer 100 min. 480 000h
Exstreamer 105 min. 460 000h
Exstreamer 110 min. 450 000h
Exstreamer 120 min. 430 000h
* depends on used codec, best results @48kHz PCM ** high quality A/D supports only certain sample rates