Barix Exstreamer 100 IP Audio Decoder – (B-Stock)

The Exstreamer 100 IP Audio Decoder decodes and plays multi-protocol and multi-format audio streams, including MP3, AACplusV2, WMA, PCM, G.711, and Ethersound. It features a stereo line level output, headphone connection, and low power consumption.

The Exstreamer 100 is a reliable IP-enabled audio streaming device which can be used in a variety of audio over IP applications such as local and internet-based IP music distribution systems, in-store audio applications, paging and announcement systems.

Applications:
– Streaming internet radio in bars and clubs
– Radio channels in hotel rooms distributed via IP network
– SIP and IP Paging Zone Device
– In-store audio player
– Multiroom IP Audio System Receiver
– Commercial audio streaming applications
– Generic VoIP decoder for IP Paging and Announcement applications

Features:
– AACplus, MP3, Ogg Vorbis, G.711, PCM linear Decoding
– IP Streaming via TCP, UDP, RTP, Multicast
– Line Level Output (Stereo)
– Relay Output (Ex110 & Ex120 only)
– RS-232 Serial Port
– Power Supply (9-30V, plug included)
– IR receiver and Display built-in (Ex110 & Ex120 only)
– MicroSD or USB Flash Interface

Analog Output:
– Line level output, 40..60 Ohm output impedance on RCA and 1/8″ headphone jack. Output level software controllable
– Full scale output voltage: 5.6 dBu, 4 Vpp
– Frequency response (-3dB) 19Hz ..22kHz *
– Dynamic range 87 dB
– SNR/THD -87 dB, 0.05%

Audio Formats:
– MP3 CBR/VBR, up to 320kbps, 8..48kHz sample freq.
– AAC, AAC plus, AAC-HE (AAC plus V2)
– WMA (up to version 9), Ogg Vorbis
– PCM 16bit @8, 16, 22.05, 24, 32, 44.1, 48 kHz
– G.711, uLaw, aLaw (sample rates same as PCM)