GatesAir FLX40KFAX50HD Flexiva 40kW (analog power) Solid-state Liquid Cooled FM Transmitter

GatesAir Flexiva 40kW (analog power) solid-state Liquid Cooled FM transmitter with Flexiva 50W Digital FM+HD Exciter and Engine.

Features Include:
– One (1) Direct to Channel Digital 50W FM modulator: includes Stereo Encoder Auto-switching analog L/R (2), AES-EBU audio (2) and composite (2) inputs, Two (2) SCA baseband inputs, Ext. 10MHZ and 1 PPS inputs
– One (1) Exgine Card included for HD Digital Radio Operation and Adaptive Correction
– Two (2) 44RU rack, complete with closeouts, rear door, AC Distribution, all required interconnecting cabling and RF line connections for four (4) 10kW Flexiva Liquid Cooled power blocks and Flexiva multiple transmitter controller.
-Three (3) 3dB Hybrid Combiner
-Type 3-1/8 inch EIA Flanged output connector.
– One (1) AC Outlet strip for customer installed auxiliary equipment installed in transmitter rack

Flexiva 10kW Power Block Includes:
– Seven (7) “Hot-Pluggable” linear RF amplifier modules (two amplifiers per module)
– One (1)”Hot-Pluggable” linear RF IPA module (two amplifiers per module)
– Seven (7) “Hot-Pluggable” auto-ranging power supplies
– Internal harmonic filter with high energy DC return for lightning protection
– Built-in MOV transient voltage suppression on incoming AC mains lines
– Proportional VSWR foldback for safe operation at reduced power into marginal loads (icy antenna, etc)
– RF ramp-up to minimize turn-on transients
– Air filter serviceable while transmitter is in operation
– Meets or exceeds all applicable FCC, Industry Canada, CCIR and IEC-215 standards, RoHS compliant
– Automatic restart after AC mains interruption; returns to previous operational mode.
– Web Remote for use in remote diagnostics using customer’s PC.

FLX External Cooling System: Includes Heat Exchanger, 50kW Dual Fan, HE III Pump Module with dual redundant pumps

INCLUDES: (2) PUMPS (1) PUMP CONTROLLER (2) PUMP INVERTERS (2) HEAT EXCHANGER INVERTERS PUMP MODULE FRAME ADDITIONAL HARDWARE and PLUMBING

Specify With Order:
Carrier Frequency: _________ MHz (87-108MHz; 10 kHz steps) Rear Door: Vented [ ] Solid [ ] (Default)
Power Supply Configuration: [ ] 190 to 265 VAC, 3 phase Delta [ ] 330 to 460 VAC, 3 phase WYE Auxiliary
AC Outlet Strip Configuration: 220VAC(Default) [ ] 120VAC [ ] Operating Mode: Main Back-up FM Only [ ] FM Only [ ] FM+HD [ ] FM+HD [ ] HD Only [ ] HD Only [ ] MAX POWER FM Only 44000W -20dBc -14dBc -10dBc FM+HD Total 44000W 41300W 34650W HD Only 16000W 14800W 12400W
Main Total Output Power: _____W Back-up
Total Output Power: _____W
HD Sideband Level: Asymmetrical [ ] Upper Sideband Injection Level: – _______ dBc
Lower Sideband Injection Level: – _______ dBc Symmetrical [ ] Sideband Injection Level: – _______ dBc

SPARES AND OPTIONS SHOWN AS SEPARATE LINE ITEMS IF PURCHASED:
Spares Options: FLXSMK FLX Module Spares Kit Includes: PA Module Qty 1 PS Module Qty 1 FLX20K-40SBK FLX20K-40K
Board Spares Kit Includes: System Interface Board Qty 1 Cabinet Interface Qty 1 Control & Display Board Qty 1 Power Supply Interface Board Qty 1 Power Amplifier Interface Board Qty 1 Micro Module Qty 1 Fan Control Board Qty 1 RF Switch Board Qty 1 Pump Diode Gating Board Qty 1 Cooling Monitor Board Qty 1 Leak Detection Board Qty 1
FLX20K-40KSPK FLX20K-40K Spare Parts Kit Includes: Hose Qty 3ft Hose Clamp Qty 2 Male Coupler Qty 1 Female Coupler Qty 1 Flow Meter Qty 1 Fuses Qty 8 Fan Qty 1 Load Resistor Qty 1
FLXHESPK FLX Heat Exchanger Spare Parts Kit Includes: Fan Qty 1 Isolator Qty 1
FLXMPSPK FLX Pump Module Spare Parts Kit Includes: Hose Qty 2ft Union O-Ring Qty 4 Union Gasket Qty 2 Filter Qty 1 SAE-6 Hose Clamp Qty 2 SAE-152 Hose Clamp Qty 1 SAE-24 Hose Clamp Qty 6 Blow-Down Valve Qty 1 Pressure Relief Valve Qty 1 Air Vent Valve Qty 1 Expansion Tank Qty 1 Pump Qty 1 Circuit Breaker Qty 2 Thermistor Qty 1 Inverter Drive Qty 1 Digital Pump Control Board Qty 1

Service Options:
FLXINSCKSVC40K Includes: On Site Install and Commissioning FLXCOMSVC40K Includes: One Day on site checkout and commissioning