Flexiva 7.5kW (analog power) solid-state FM transmitter with Flexiva 150W Exciter.
– One (1) Direct to Channel Digital 150W FM modulator: includes Stereo Encoder Auto-switching analog L/R (2), AES-EBU audio (2) and composite (2) inputs, Two (2) SCA baseband inputs, Ext. 10MHZ and 1 PPS inputs
– Five (5) “Hot-Pluggable” linear RF amplifier modules (two amplifiers per module)
– Five (5) “Hot-Pluggable” auto-ranging power supplies
– Dual Exciter inputs (Main/Alt) with automatic switching (Does not include backup exciter, second exciter quoted separately)
– Internal harmonic filter with high energy DC return for lightning protection
– Type 1-5/8 inch output connector.
– Front panel control and metering.
– RF directional couplers for system protection and RF sample probe for customer use.
– Built-in parallel interface for remote control, status and metering; RFI and transient protected.
– Proportional VSWR foldback for safe operation at reduced power into marginal loads (icy antenna, etc).
– Automatic restart after AC mains interruption; returns to previous operational mode.
– Built-in MOV transient voltage suppression on incoming AC mains lines.
– Web Remote for use in remote diagnostics using customer’s PC.
– All system technical manuals and final test data provided at no additional cost.
– Meets or exceeds all applicable FCC, Industry Canada, CCIR and IEC-215 standards, RoHS compliant.
– Mounting requirement, transmitter: 16RU (EIA spacing)
Specify With Order:
Carrier Frequency: _________ MHz (87-108MHz; 10 kHz steps) Power Supply Configuration: [ ] 190 to 265 VAC, single phase [ ] 190 to 265 VAC, 3 phase DELTA [ ] 330 to 460 VAC, 3 phase WYE Operating Mode: MAX POWER FM Only 8250W Main Total Output Power: _____W
OPTIONAL SPARES AND OPTIONS TO BE ADDED AS SEPARATE LINE ITEMS ON THE QUOTE IF PURCHASED:
Rack Options: [ ] Stand alone 16 RU Transmitter and Exciter (20 RU) [ ] Optional Basic Rack configuration with rear door and RF Hardline: Installed in 37 RU basic rack, Side Panels, vented top, rear door, 10 RU Exciter air baffle, Equipment side support bracket/slides, RF transmission line to the top of the rack, 1-5/8 inch Male Flanged with flanged to un-flanged adapter.
PN HARFAX7.5KBSCRKRF [ ] Optional Deluxe Rack Configuration: Installed in 37 RU deluxe rack, side panels, vented top, rear door, 10 RU Exciter air baffle, Equipment side support bracket/slides, AC distribution panel, RF transmission line to the top of the rack, 1-5/8 inch Male Flanged with flanged to un-flanged adapter.
HPN HARFAX7.5KDLXRK [ ] Optional Deluxe Rack Configuration: Installed in 37 RU deluxe rack, side panels, vented top, rear door, 10 RU Exciter air baffle, inch Equipment side support bracket/slides, AC distribution panel, RF transmission line to the top of the rack, 1-5/8 inch Male Flanged with flanged to un-flanged adapter
HARFAXINSCKSVC Includes: On Site Install and Commissioning
HARFAXCOMSVC Includes: One Day on site checkout and commissioning