The Temblor T10 Active 10″ Studio Subwoofer is designed for low frequency sound reinforcement while monitoring in a recording studio. The subwoofer utilizes a 10-inch composite low frequency driver with a frequency response of 20 to 200 Hz and a maximum SPL of 110 dB. The driver is housed within a heavily braced and reinforced MDF cabinet with a vinyl finish and ported bass reflex design. It is powered by a 250 Watt Class AB plate amplifier. To reduce vibration, the unit features internal dampening and rests on built-in feet. The subwoofer features a variable crossover frequency between 50 and 130 Hz, input gain controls from -30 dB to +6 dB, a 0° or 180° phase switch, and a ground lift switch.
You can connect to the subwoofer via a pair of balanced XLR inputs, a balanced pair of 1/4″ TRS inputs, or an unbalanced pair of RCA inputs. The subwoofer also includes a balanced pair of XLR pass-through outputs, a balanced pair of 1/4″ TRS pass-through outputs, and a balanced XLR sub output. The unit features a 120/240 VAC switchable power supply to accompany studio monitors in different regions. A footswitch with a cable is included.
A solid foundation for mixing:
Powerful and musical, Temblor® T10 active, front-firing subwoofers are designed to deliver fast and accurate transient response, extending low frequencies without a hint of “tubbiness” or overshoot. This ensures that Temblor-series subwoofers complement full-range monitors without overshadowing them, naturally extending the reach of your full-range system’s low end so that you can produce your best mix from top to bottom.
Tight, clean, responsive bass:
The Temblor T10’s glass-composite low-frequency driver delivers tight and responsive bass, thanks to its lightweight and rigid cone. This design also provides lower distortion than other materials, ensuring that the sub-bass reproduction in your monitoring system is as coherent and clear as your full-range monitors.
-Active studio subwoofer with 10″ reinforced-composition woofer
-Plenty of punch and impact from 250 watts of Class AB power
-Flexible connectivity, with balanced XLR and TRS inputs and unbalanced RCA inputs
-Pass-through on balanced XLR or TRS for connecting main speakers, with 100Hz highpass switch
-Variable input gain and lowpass filter, plus switchable phase and ground lift
Speaker Size: 10″
Driver Type: Glass Composite Cone
Total Power : 250W
Frequency Range: 20Hz-200Hz
Crossover Frequency: 50Hz
Maximum Peak SPL: 113dB
Input Types: 2 x XLR, 2 x 1/4″, 1 x Dual RCA Stereo
Output Types: 2 x XLR (L/R), 1 x XLR (sub out), 2 x 1/4″ (L/R)
Other I/O: 1 x 1/4″ (sub bypass footswitch)
Weight: 39.46 lbs.